How many square feet are in an acre?

One acre is 43,560 square feet. NIST lists the acre as exactly that. Divide square feet by 43,560 to get acres, or multiply acres by 43,560 to get square feet.

That makes half an acre 21,780 square feet and a quarter acre 10,890. If the acre were a square, each side would be about 208.71 feet.

Have a lot size in square feet and want it in acres? Divide by 43,560, or let the square footage calculator do it and show the result in square feet, square yards and acres.

Why an acre is 43,560 square feet

NIST lists the acre as exactly 43,560 square feet, equal to 10 square chains, in its unit conversion factors for U.S. customary units. A chain is 66 feet and a furlong is 660 feet. Multiply them: 66 × 660 = 43,560.

An acre is a unit of area only. It has no required shape, so a long thin field and a neat square can both be one acre.

Is 200 feet by 200 feet an acre?

No, and neither is 210 feet by 210 feet. The rule is the same one you would use for any rectangle: multiply the two sides, then divide by 43,560.

  • 200 × 200 ft. No. 40,000 square feet, which is 0.92 acre and 3,560 square feet short.
  • 208 × 208 ft. Just under. 43,264 square feet, or 0.99 acre.
  • 210 × 210 ft. Just over. 44,100 square feet, or 1.01 acres, 540 square feet past an acre.
  • 400 × 400 ft. No. 160,000 square feet, or 3.67 acres.

Round dimensions rarely land on a whole number of acres, because 43,560 is not a round number of feet. These sizes are worked out with the acre figures rounded to two decimals:

Dimensions Square feet Acres
100 ft × 100 ft 10,000 0.23
150 ft × 150 ft 22,500 0.52
200 ft × 200 ft 40,000 0.92
208 ft × 208 ft 43,264 0.99
210 ft × 210 ft 44,100 1.01
250 ft × 250 ft 62,500 1.43
400 ft × 400 ft 160,000 3.67

For a square that is exactly an acre, the side has to be about 208.71 feet. That is the square root of 43,560, which does not come out to a tidy number.

Working out your own lot

Measure the two sides and multiply. A lot 120 feet wide and 350 feet deep is 120 × 350 = 42,000 square feet, which is about 0.96 acre.

If you know the acreage and want to picture it as a square, take the square root of the square footage in feet. A square quarter acre is about 104.4 feet on each side, and a square half acre about 147.6 feet. A square acre is the 208.71 feet worked out above, and it runs roughly 835 feet all the way around.

For an irregular or L-shaped lot, split it into rectangles and triangles, work out each piece, and add them. The square footage calculator adds rooms and shapes and subtracts cut-outs, which does the same job faster. From there the concrete calculator turns an area into cubic yards and bags, and the roofing calculator works in square feet and roofing squares.

Acres to square feet

Acres Square feet
1/10 acre 4,356
1/8 acre 5,445
1/5 acre 8,712
1/4 acre 10,890
1/3 acre 14,520
3/8 acre 16,335
1/2 acre 21,780
2/3 acre 29,040
3/4 acre 32,670
1 acre 43,560
1.5 acres 65,340
2 acres 87,120
5 acres 217,800
10 acres 435,600

A third of an acre is 14,520 square feet because 43,560 ÷ 3 = 14,520. To fill in any figure that is not listed, multiply the acres by 43,560.

Converting square feet to acres

Divide the square feet by 43,560.

Square feet Acres
1,000 0.02
5,000 0.11
10,000 0.23
15,000 0.34
20,000 0.46
50,000 1.15
100,000 2.30
150,000 3.44

One acre in other units

Unit One acre equals
Square feet 43,560
Square yards 4,840
Square meters 4,046.86 (international acre)
Hectares about 0.4047
Square miles 1/640 (about 0.0016)

Going the other way: one hectare is about 2.471 acres, or about 107,639 square feet, and one square mile is 640 acres. That last one is exact and checks itself, because a mile is 5,280 feet, so a square mile is 5,280 × 5,280 = 27,878,400 square feet, and 27,878,400 ÷ 43,560 = 640.

How an acre compares with things you know

An NFL field is 360 feet long and 160 feet wide including the end zones, with the goal lines 10 yards in from each end line, under the NFL playing rules, Rule 1, Section 1. The playing area between the goal lines is 300 × 160 = 48,000 square feet, or 1.10 acres. Including both end zones, the whole field is 360 × 160 = 57,600 square feet, or 1.32 acres.

An ITF doubles court is 78 feet by 36 feet, or 2,808 square feet of playing area under the ITF court specification. About 15.5 fit into an acre. The ground a court needs is larger: the ITF’s recommended minimum space for international competition is about 120 feet by 60 feet, or 7,200 square feet.

The two kinds of acre

There is an international acre and a U.S. survey acre. Both are 43,560 square feet, but each is counted in its own foot, and the two feet differ by about two parts per million. That makes the two acres differ by about four parts per million, which is about 0.016 square meters on 4,047.

In metric terms the international acre is 4,046.8564224 square meters and the survey acre is 4,046.872609874. NIST states that the survey foot should be avoided after December 31, 2022 except for historic and legacy work. The square-foot answer does not change: 43,560, whichever foot you count it in.

Common questions

How many square feet are in half an acre? 21,780.

How many square feet are in a quarter acre? 10,890.

How many acres are in a square mile? 640.

Is a football field an acre? No. Between the goal lines it is 1.10 acres.

How many square feet are in a hectare? About 107,639.

Does the acre change if it is farmland or a house lot? No. An acre is a unit of area, so an acre of land is 43,560 square feet whatever stands on it.


Acre-to-square-foot figures on this page are exact. Rounded figures are marked about or given to the decimals shown. A conversion cannot make a measured lot more accurate. For a boundary, a permit or a sale, use the acreage on your deed, plat or survey. Our calculators give estimates for your own records, and they are not a substitute for a surveyor’s measurements.

More articles · Spotted a mistake? Tell us.